phone orders 1-866-327-8168

Kingston ValueRAM 4GB DDR3 1600 (PC3L 12800) SoDIMM

  • SKU:  MEMKINKVR16LS11/4
  • Brand: Kingston
  • Manufacturer Part #: KVR16LS11/4
  • EDI Item #: MEM-KIN-KVR16LS11/4
Login to see price.
28
In Stock

KVR16LS11/4 is a 512M x 64-bit (4GB) DDR3L-1600 CL11 SDRAM (Synchronous DRAM), 1Rx8, low voltage, memory module, based on eight 512M x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR3-1600 timing of 11-11-11 at 1.35V or 1.5V

KVR16LS11/4

  • JEDEC standard 1.35V (1.28V ~ 1.45V) and 1.5V (1.425V ~ 1.575V) Power Supply
  • VDDQ = 1.35V (1.28V ~ 1.45V) and 1.5V (1.425V ~ 1.575V)
  • 800MHz fCK for 1600Mb/sec/pin
  • 8 independent internal bank
  • Programmable CAS Latency: 11, 10, 9, 8, 7, 6
  • Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
  • 8-bit pre-fetch
  • Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
  • Bi-directional Differential Data Strobe
  • Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
  • On Die Termination using ODT pin
  • Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C
  • Asynchronous Reset
  • PCB: Height 1.18” (30mm), double sided component

Manufacturer Warranty: Limited Lifetime Via Kingston

Manufacturer Return Information: Kingston Support

EDI Returns Allowed: Yes *DOA or Unopened only

EDI Return Period (Days): 30

MFR Box Qty:

UPC Code: 0740617219784

 

-Visit the Eastern Data customer service page for general company RMA policy

No products found.