phone orders 1-866-327-8168

Kingston ValueRAM 2GB DDR3 1600 (PC3 12800) DIMM

  • SKU:  MEMKINKVR16N11S6/2
  • Brand: Kingston
  • Manufacturer Part #: KVR16N11S6/2
  • EDI Item #: MEM-KIN-KVR16N11S6/2
Login to see price.

Out of Stock

KVR16N11S6/2 is a 256M x 64-bit (2GB) DDR3-1600 CL11 SDRAM (Synchronous DRAM) 1Rx16, memory module, based on four 256M x 16-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR3-1600 timing of 11-11-11 at 1.5V

KVR16N11S6/2

  • JEDEC standard 1.5V (1.425V ~1.575V) Power Supply
  • VDDQ = 1.5V (1.425V ~ 1.575V)
  • 800MHz fCK for 1600Mb/sec/pin
  • 8 independent internal bank
  • Programmable CAS Latency: 11, 10, 9, 8, 7, 6
  • Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
  • 8-bit pre-fetch
  • Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
  • Bi-directional Differential Data Strobe
  • Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
  • On Die Termination using ODT pin
  • Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C
  • Asynchronous Reset
  • PCB : Height 1.180” (30.00mm), single sided component

Manufacturer Warranty: Limited Lifetime Via Kingston

Manufacturer Return Information: Kingston Support

EDI Returns Allowed: Yes *DOA or Unopened only

EDI Return Period (Days): 30

MFR Box Qty:

UPC Code: 0740617226751

 

-Visit the Eastern Data customer service page for general company RMA policy

No products found.